How much do you know about the inspection and maintenance of Wholesale mono solar panels products? Let’s take a look at it briefly below!
1. Check whether the battery board is damaged. It must be discovered and replaced in time.
2. Check whether the connection wire of the battery board and the ground wire are in good contact or not.
3. Check whether there is any heat phenomenon at the wiring of the combiner box.
4. Check whether the battery board bracket is loose or broken.
5. Check and clean up the weeds around the panel that cover the panel.

6. Check whether there is any cover on the surface of the battery board.
7. Check the bird droppings on the surface of the battery panel and clean it up if necessary.
8. Identify the cleanliness of the battery board.
9. In windy weather, key inspections of battery panels and brackets should be carried out.
10. In heavy snow days, the battery panel should be cleaned in time to avoid snow and ice on the surface of the battery panel.
11. In heavy rain, check whether all waterproof seals are in good condition and whether there is water leakage.
12. Check whether animals enter the power station to damage the battery panels.
13. In hail weather, the surface of the panel should be checked.
14. Detect the temperature of the battery panel and compare it with the ambient temperature for analysis.
15. The problems detected should be dealt with, analyzed and summarized in a timely manner.
16. Make detailed records for each inspection to facilitate future analysis.
The above is a brief introduction to the inspection and maintenance knowledge of Wholesale mono solar panels products.